1.3L 2L 3.2L 4.5L 6.5L 10L 15L 22L 30L Digital Ultrasonic Cleaner Heater&Timer

1.3L 2L 3.2L 4.5L 6.5L 10L 15L 22L 30L Digital Ultrasonic Cleaner Heater&Timer. The ultrasonic working time is 1-99 minutes, temperature up to 80, suitable for different occasions 2. Adopt the most advanced bonding process, no cylinder, no nailing and cylinder removal 3. Increased conversion efficiency and safety with safe and efficient transducers 4. The shell is made of high quality anti-fingerprint stainless steel embossed plate, which is beautiful and elegant. The cleaning tank is made of high quality stainless steel in one press, no welding, better waterproof performance 6. Adopt high-quality components, high ultrasonic efficiency, powerful power and good cleaning effect. Item Type: Ultrasonic Cleaner Model: 113HTD Type: Digital Timing Heating Inner Tank Capacity: 1.3L Inner Tank Size: Approx. 150 x 140 x 65mm / 5.9 x 5.5 x 2.6in Ultrasonic Frequency: 40KHz Ultrasonic Power: 60W Heating Power: 100W Number of Vibration Heads: 1 Working Time Range: 1-99min Temperature Range: 0-80 ° C Liner Material: SUS304 Stainless Steel Shell Material: Stainless Steel Basket: Equipped Sound Reduction Cover: Equipped. Q: What is an ultrasonic cleaner? A: Ultrasonic cleaning is based on the cavitation effect caused by high frequency ultrasonic wave vibration signal in the fluid. Microscopic bubbles are formed, and then implode violently causing the cavitation which create an intense scrubbing action on the surface of the item being cleaned. Bubbles are small enough to penetrate microscopic crevices, cleaning them thoroughly and consistently. Q: Which products can I clean this model? A: Many products can be cleaned, such as glasses, necklaces, earrings, bracelets, electronics, watches, dentures, printer ink heads, shaver heads, nibs, coins, badges, pacifiers, etc. Q: Which washing aid can be properly added for better cleaning during the cleaning process? A: You can add cleaning liquid or detergent, such as: dishwashing liquid, soapy water, disinfectant, etc. However, do not add acid or alkaline solution, prevent ABS corrosion damage. Q: Common products have 40HZ or 33HZ. What is the difference between these two frequencies? A: These products are divided into high frequency and low frequency.

Generally, the high frequency has 40HZ and 42HZ, and the low frequency generally has 28HZ and 33HZ. The higher the frequency, the larger the number of bubbles generated, the smaller the bubbles, and the better the cleaning effect for some blind holes; the lower the frequency, the smaller the number of bubbles generated and the larger the bubbles, which is suitable for cleaning large surfaces. Products with both frequencies can be better cleaned.

1 x English User Manual. When the ultrasonic is in normal operation, the uniform sound of the ultrasonic and the tank body should be heard, and the surface of the cleaning liquid is not excited. Only the ripple caused by the hole blasting, if there is intermittent oscillation, please add a little cleaning liquid or discharge a little cleaning liquid. Eliminate the oscillations and help to clean the objects. Under the premise of ensuring that the cleaning objects are clean, work as intermittently as possible and not warm, because the warming and long-time ultrasonic work will increase the temperature inside the chassis and accelerate the aging of the electronic components.

Never use flammable and corrosive detergents. When there is no proper cleaning solution in the cleaning tank, the heating and ultrasonic waves must not be turned on. Prevent cleaning fluid and water from entering the chassis, soaking the circuit board and the vibrator, burning electrical components. If any foreign object falls into the bottom of the tank, remove it immediately (do not take it directly by hand to prevent injury). When changing liquid or draining, it should be carried out in the tank at normal temperature, and be sure to turn off the power and unplug the power cord! After cleaning, do not accumulate in the cleaning tank!

Keep the appearance of the machine clean when cleaning; clean the machine after stopping, keep the whole machine clean and dry. Each working time should not be too long. It should be stopped for 15 minutes after 15 minutes of power-on to better protect the machine and reduce the failure rate. The working time of ultrasonic can be freely adjusted within 1-99 minutes, maximum heating temperature 80, suitable for different application scenarios.

Built-in high efficient transducer to improve conversion efficiency and safety performance. The shell is made of high quality fingerprint-proof stainless steel embossing board, which is beautiful, anti-rust and sturdy. The cleaning tank is stamped with premium stainless steel, without any welds for better waterproof performance. Adopt high quality components, featuring high ultrasonic efficiency, strong power, good cleaning effect.

Item Type: Ultrasonic Cleaner Model: 1027HTD Cleaning Tank Capacity: 30L Cleaning Tank Size: Approx 50x30x20cm / 19.69x11.81x7.87in Dimension: Approx 55x33x38cm / 21.65x12.99x14.96in Ultrasonic Frequency: 40KHz Ultrasonic Power: 600W Heating Power: 500W Number of Vibration Heads: 10 Working Time Range: 1-99min Temperature Range: 0-80 Liner Material: SUS304 Shell Material: Stainless Steel Net Basket: Equipped Noise Reduction Lid: Equipped. FAQ: Q: What is an ultrasonic cleaner? The bubbles are small enough to penetrate microscopic crevices, cleaning them thoroughly and consistently. Q: Which products can this ultrasonic cleaner clean?

A: Many products can be cleaned. Common such as glasses, necklace, earring, bracelet, electronic, watch, false tooth, printer ink head, shaver head, nib, coin, badge, nipple, etc. Q: Which detergents can be properly added for better cleaning during cleaning? A: You can add cleaning liquid or abluent, such as: cleanser essence, soapy water, disinfectant, etc.

However, do not add acid or alkaline solution to the machine to prevent ABS from corrosion and damage. When the ultrasonic wave is in normal operation, the uniform resonance sound of the ultrasonic wave and the tank body should be heard, and the surface of the cleaning liquid is not excited, only the ripple caused by the hole blasting. If there is intermittent oscillation, please add a little cleaning liquid or discharge a little cleaning liquid.

Eliminating the oscillations helps to clean the objects. Under the premise of ensuring that the cleaning objects are clean, work as intermittently as possible and not heat, because the heating and long-time ultrasonic work will increase the temperature inside the chassis, and it is easy to accelerate the aging of the electronic device. When there is no proper amount of cleaning liquid in the cleaning tank, the heating and ultrasonic wave must not be turned on. Prevent the cleaning fluid and water from entering the chassis, soaking the circuit board and the vibrator, which will burn the electronic components. If any foreign object falls into the bottom of the tank, it should be taken out immediately (not directly taken by hand to prevent injury). After cleaning, do not leave liquid in the cleaning tank!

Instead of leaving negative/neutral feedback or opening a dispute. Our listing price includes the value of goods, packaging cost, and export. Please check with your country's.

We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. Post a message again because sometimes our message system may block some emails. If you are satisfied with our service, pls. Our aim is to provide Top Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy. We will always do our up most to exceed your expectations in customer service, communication and dispatching of your orders. The item "1.3L 2L 3.2L 4.5L 6.5L 10L 15L 22L 30L Digital Ultrasonic Cleaner Heater&Timer" is in sale since Friday, November 1, 2019. This item is in the category "Business & Industrial\Healthcare, Lab & Dental\Medical & Lab Equipment, Devices\Ultrasonic Cleaners". The seller is "accessories_mall" and is located in Hongkong. This item can be shipped worldwide.

Brand: Unbranded
Shell Material: Stainless Steel
Type: Digital Timing Heating
Country/Region of Manufacture: China
Basket: Equipped
MPN: Does Not Apply
Liner Material: SUS304 Stainless Steel
Item Type: Ultrasonic Cleaner