2L Stainless Steel Ultrasonic Jewelry Cleaner with Digital LED Timer Heater
2L Stainless Steel Ultrasonic Jewelry Cleaner with Digital LED Timer Heater. The working time of ultrasonic can be freely adjusted within 1-99 minutes, maximum heating temperature 80, suitable for different occasions. Built-in safe and efficient transducer to improve conversion efficiency and safety performance.
The shell is made of high quality fingerprint-proof stainless steel embossing board, which is beautiful and elegant. The cleaning tank is stamped with premium stainless steel, without any welds for better waterproof performance.Adopt high quality components, featuring high ultrasonic efficiency, strong power, good cleaning effect. Item Type: Ultrasonic Cleaner Model: 120HTD Cleaning Tank Capacity: 2L Cleaning Tank Size: Approx 150x140x100mm / 5.91x5.51x3.94in Ultrasonic Frequency: 40KHz Ultrasonic Power: 60W Heating Power: 100W Number of Vibration Heads: 1 Working Time Range: 1-99min Temperature Range: 0-80 Liner Material: SUS304 Shell Material: Stainless Steel Net Basket: Equipped Noise Reduction Lid: Equipped. FAQ: Q: What is an ultrasonic cleaner? A: Ultrasonic cleaning is based on the cavitation effect caused by high frequency ultrasonic wave vibration signal in the fluid. Microscopic bubbles are formed, and then implode violently causing the cavitation which create an intense scrubbing action on the surface of the item being cleaned. The bubbles are small enough to penetrate microscopic crevices, cleaning them thoroughly and consistently. Q: Which products can this ultrasonic cleaner clean? A: Many products can be cleaned. Common such as glasses, necklace, earring, bracelet, electronic, watch, false tooth, printer ink head, shaver head, nib, coin, badge, nipple, etc. Q: Which detergents can be properly added for better cleaning during cleaning? A: You can add cleaning liquid or abluent, such as: cleanser essence, soapy water, disinfectant, etc. However, do not add acid or alkaline solution to the machine to prevent ABS from corrosion and damage.
When the ultrasonic wave is in normal operation, the uniform resonance sound of the ultrasonic wave and the tank body should be heard, and the surface of the cleaning liquid is not excited, only the ripple caused by the hole blasting. If there is intermittent oscillation, please add a little cleaning liquid or discharge a little cleaning liquid. Eliminating the oscillations helps to clean the objects. Under the premise of ensuring that the cleaning objects are clean, work as intermittently as possible and not heat, because the heating and long-time ultrasonic work will increase the temperature inside the chassis, and it is easy to accelerate the aging of the electronic device.Never use flammable and corrosive detergents. When there is no proper amount of cleaning liquid in the cleaning tank, the heating and ultrasonic wave must not be turned on. Prevent the cleaning fluid and water from entering the chassis, soaking the circuit board and the vibrator, which will burn the electronic components. If any foreign object falls into the bottom of the tank, it should be taken out immediately (not directly taken by hand to prevent injury). When changing liquid or draining, it should be carried out in the tank at normal temperature, and be sure to turn off the power and unplug the power cord! After cleaning, do not leave liquid in the cleaning tank! Keep the appearance of the machine clean when cleaning; clean the machine after stopping, keep the whole machine clean and dry. Everytime working time should not be too long.
- Brand: Unbranded
- Cleaning Tank Capacity: 2L
- Cleaning Tank Size: Approx 150x140x100mm
- Heating Power: 100W
- Item Type: Ultrasonic Cleaner
- Liner Material: SUS304
- Model: 120HTD
- MPN: Does Not Apply
- Net Basket: Equipped
- Noise Reduction Lid: Equipped
- Number of Vibration Heads: 1
- Shell Material: Stainless Steel
- Temperature Range: 0-80
- Ultrasonic Frequency: 40KHz
- Ultrasonic Power: 60W
- Working Time Range: 1-99min