6.5L Professional Ultrasonic Cleaner with Digital Timer&Heater for Jewelry Watch
6.5L Professional Ultrasonic Cleaner with Digital Timer&Heater for Jewelry Watch. Ultrasonic working time is 1-99 minutes, heating temperature is up to 80 °C, suitable for different occasions.Adopts most advanced bonding process, no tank piercing, no nail mark or falling off of tank. Use safe and efficient transducers to improve conversion efficiency and safety performance. The shell is made of high-quality anti-fingerprint stainless steel embossed plate, which is beautiful and generous. The cleaning tank is made of high-quality stainless steel in one press, without welding, and has better waterproof performance. Using high-quality components, high ultrasonic efficiency, strong power and good cleaning effect. Item Type:Ultrasonic Cleaner Model: 360HTD Type: Digital Timing Heating Inner Tank Capacity: 6.5L Inner Groove Size: 300 x 155 x 150mm / 11.81 x 6.1 x 5.91in Ultrasonic Frequency: 40KHz Ultrasonic Power: 180W Heating Power: 300W Number of Vibration Heads: 3 Working Time Range: 1-99Min Temperature Range: 0-80 ° C Liner Material: SUS304 Stainless Steel Shell Material: Stainless Steel Basket: Equipped Sound Reduction Cover: Equipped Function:Glasses, rings, coins, jewelry, industrial parts, hardware tools, watches, dentures, surgical instruments, PCB boards Instruction: 1. After unpacking, shake the machine slightly and listen to the sound in the chassis to confirm whether the parts are loose. Place the machine in a ventilated and dry place to ensure that the machine is in a horizontal position; 3.
Add an appropriate amount of cleaning solution 2/3 groove depth. (The heating function can be freely switched, which is another feature of this machine) 7. Shut down after completing work: After the cleaning work is completed, if it is not necessary to operate, the heating. Part should be turned off 1th, and the power supply should be disconnected. After the cleaning liquid is cooled to normal temperature, the cleaning liquid is drained, and the inner tank and outer casing are wiped clean.The used machine should be placed dry. Ventilation to avoid moisture in the control circuit. Q: What is an ultrasonic cleaner? A: Ultrasonic cleaning is based on the cavitation effect caused by high frequency ultrasonic wave vibration signal in the fluid. Microscopic bubbles are formed, and then implode violently causing the cavitation which create an intense scrubbing action on the surface of the item being cleaned. Bubbles are small Through to penetrate microscopic crevices, cleaning them thoroughly and consistently. Q: Which products can I clean this model?
A: Many products can be cleaned. Common such as glasses, necklaces, earrings, bracelets, electronics, watches, dentures, printer ink heads, razor heads, nibs, coins, badges, pacifiers, etc. Q: Which builders can be properly added for better cleaning and cleaning during the cleaning process?
Eliminating the oscillations helps to clean the objects. Under the premise of ensuring that the cleaning objects are clean, work as intermittently as possible and not warm, because the warming and long-time ultrasonic work will increase the temperature inside the chassis, and it is easy to accelerate the aging of the electronic device. Never use flammable and corrosive detergents.When there is no proper amount of cleaning liquid in the cleaning tank, the heating and ultrasonic waves must not be turned on. Prevent the cleaning fluid and water from entering the chassis, soaking the circuit board and the vibrator, and burning the electronic components. If any foreign object falls into the bottom of the tank, it should be taken out immediately (not directly taken by hand to prevent injury). When changing liquid or draining, it should be carried out in the tank at normal temperature, and be sure to turn off the power and unplug the power cord! After cleaning, do not accumulate in the cleaning tank! Keep the appearance of the machine clean when cleaning; clean the machine after stopping, keep the whole machine clean and dry. Instead of leaving negative/neutral feedback or opening a dispute. Our listing price includes the value of goods, packaging cost, and export. Please check with your country's. We will reply your message within 48 hours.
- Basket: Equipped
- Brand: Unbranded
- Country/Region of Manufacture: China
- Heating Power: 300W
- Inner Tank Capacity: 6.5L
- Inner Tank Size: 300 x 155 x 150mm
- Item Type: Ultrasonic Cleaner
- Liner Material: SUS304 Stainless Steel
- Model: 360HTD
- MPN: Does Not Apply
- Number of Vibration Heads: 3
- Shell Material: Stainless Steel
- Sound Reduction Cover: Equipped
- Temperature Range: 0-80 ° C
- Type: Digital Timing Heating
- Ultrasonic Frequency: 40KHz
- Ultrasonic Power: 180W
- Working Time Range: 1-99min