Branson CPXH Bransonic Ultrasonic Cleaner digital timer with heat, 1.5 gal, 120
Branson CPXH Bransonic Ultrasonic Cleaner digital timer with heat, 1.5 gal, 120 V. All of the controls are mounted in an easily accessible control panel above and behind the cleaning tank. Tanks are rugged stainless steel, with no corner welds or other dirt catching surfaces and are sealed tight to prevent leaks. Sweep frequency eliminates standing waves and creates consistent cavitation throughout the tank.
40 kHz rugged industrial transducers. 99-minute digital timer and continuous ultrasonic operation.
Can be heated up to 156.2°F (69°C) and set for either Fahrenheit or Celsius. Last stored parameters are recalled when unit is turned back on. Degassing and conditioning the solution. High-temperature safety alarm indicator for protection from unit overheating. Temperature calibration is user accessible through front panel.Controls are located above and behind the cleaning tank in an easily accessible control tower panel, and raised above the tank to avoid damage from cleaning solutions. Automatically maintains the ultrasonic power by adjusting for changes in liquid level and temperature caused by a light or heavy load. This helps ensure more uniform cleaning and consistent performance, even with multiple users or when bath conditions change. The degassing period can be set up to 99 minutes. Extended degas time periods allow for "beyond cleaning" applications such as sample preparation, which includes degassing liquids, mixing and homogenization, dissolving solids, cell lysing, and dispersion of particles. This bath is completely programmable. Once the process is entered into the controller, the end user only has to start the programand they are free to leave the unit on its own to do the job. The programmable process allows the process engineer to choose the temperature set point at which the degassing and ultrasonic time periods are triggered to begin. Once the CPXH ultrasonic run timeperiod is reached, the unit shuts off, delivering the same results - every time. When the process temperature reaches the programmable set point, the ultrasonic cycle begins. This includes selectable times for both degas and ultrasonic processing. When cleaning delicate parts, this bath allows the user to lower the amplitude of the acoustic energy in the bath: 100% power to the tank for normal applications, 70% power for delicate applications. Manipulating the output waveform in this manner greatly helps to avoid damage to the components in the bath during the ultrasonic process. When the cycle is complete and no control keys are touched for 15 minutes, it goes into sleep mode. Touching any key on the controller causes the unit to come back on. 1.5 gal (5.7L). Tank: 11.5 x 6 x 6" (290 x 150 x 150 mm) Overall: 15.6 x 12.5 x 14.8" (397 x 317 x 377 mm). 12 lbs (5.4 kg). This item is in the category "Business & Industrial\Healthcare, Lab & Dental\Medical & Lab Equipment, Devices\Ultrasonic Cleaners". The seller is "itminstruments" and is located in this country: CA. This item can be shipped to Canada.
- Brand: Branson Ultrasonics
- MPN: CPX3800H